3-Hour Fast Charger 67.2V 10A Raptor2
- Free Shipping All Part
- YUME® Scooter Warranty
⚠️ Compatibility Notice: This charger is designed exclusively for the YUME Raptor2. It is NOT compatible with any other YUME scooter models.
🚚 PRE-ORDER — Estimated Shipping: Mid September
YUME Raptor2 67.2V 10A Fast Charger
Charge your Raptor2 faster and spend less time waiting. The 67.2V 10A Fast Charger can fully charge the Raptor2 in approximately 3 hours, making it ideal when you need to get back on the road sooner.
⚠️ Important Charging Limit
The Raptor2 supports a maximum total charging current of 10A.
When using this 10A charger:
- Use only one 10A charger at a time.
- DO NOT connect two 10A chargers simultaneously.
- Do not use another charger through the second charging port while the 10A charger is connected.
Exceeding the supported 10A charging current may damage the battery or charging system.
Built-In Charging Protection
The charger includes built-in protection systems designed to help protect the charger and battery during normal use:
- Overload protection
- Over-voltage protection
- Under-voltage protection
- Short-circuit protection
Charging Status Indicator
The built-in LED indicator makes it easy to check the charging status:
- Red Light: Charging
- Green Light: Fully charged
Once the battery reaches full charge, the charger automatically stops charging.
Active Cooling System
An integrated cooling fan helps dissipate heat and keeps the charger operating at a suitable temperature during high-current charging. This supports stable charging performance and helps extend the charger’s service life.
Important Notes
- Designed exclusively for the YUME Raptor2 67.2V charging system.
- Not compatible with other YUME scooter models.
- The charger is not waterproof. Keep it dry during use and storage.
- Always charge in a dry, well-ventilated area.
- Do not cover the charger while it is operating.
- Do not use the charger if the charger, cable, plug, or scooter charging port appears damaged.
- Maximum supported charging current for the Raptor2: 10A total.
Recommended Charging Procedure
- Connect the charger to the Raptor2 charging port.
- Connect the charger to the AC power outlet.
- Allow the battery to charge until the indicator turns green.
- Disconnect the charger from the AC power outlet first.
- Then disconnect the charger from the scooter.